December 14, 2011

Naming Our Sumo Bot - "The Clunker"


As we were in class getting ready for the competition tomorrow, we were asked for our robots name, and we then realised that we did not have one, and after a few minutes, we came up with the name "The Clunker". We felt that this name could describe our robot well, because of its appearance.

December 9, 2011

Wiring Of The Clunker


Today, we started all the wiring and finished off the moving robot. We started with the 2 switches connecting to the power and to the two motors. Next we moved onto wiring the battery, which we did have, an issue at first. We did not connect the batteries correctly, resulting in the motor moving very slowly. We then realized that the motors were only running off 1 battery, which was 6v, rather than all three battery's which was 18v total.

December 1, 2011

Building The Frame of The Clunker


We gathered all the pieces that we needed, we then began to build at James's house. We decided to start off by building the base, which was easy after we made the correct measurements. Next, we drilled out all the holes needed, and sawed off the excess wood. We encountered one problem, with mounting the wheels onto the motor shaft because our measurements were off, so the wheels were shaking on the shaft. We also installed the front wheels onto body. Later we began the wiring for the controller, and started the wiring from the battery's to the motors and to the remote.